H2S Removal from Agricultural Biogas

Production and Use
Typical User Conditions

Agricultural Biogas Production and Use

Agricultural biogas produced in farm-based anaerobic digesters or covered lagoons can be used as a fuel source to power generator sets, or converted to compressed natural gas on-site or at third-party compressor stations through utility pipeline transmission.

When used as a fuel source, the presence of H2S in the biogas will have a damaging effect on reciprocating or turbine engine life, increase maintenance costs, and shorten time between rebuilds. Generator set manufacturers have begun setting limits on H2S concentrations as part of their conditions imposed on the user to maintain warranty coverage.

In order to meet sulfur dioxide emission limits on engine exhausts H2S may need to be removed prior to combustion. In cases of extremely low general emission limits, where a catalytic converter is necessary, the H2S must be removed prior to combustion or the life of the expensive catalyst will be reduced substantially.

If the biogas is converted to CNG, those specifications include very low limits on H2S. When the gas is transported via a utility pipeline to a CNG compression station, even lower pipeline specifications will have priority.

Typical User Conditions

Flow rates are typically low to mid-range, 100scfm to 1,000scfm, but H2S concentrations are generally high, in some cases up to 10,000ppmv. Importantly, concentrations can vary widely and seasonally according to water sources and the addition of other material to the digester.

MVTechnologies H2SPlus and BioH2SPlus Hybrid systems deliver superior value in this application.

© 2024  MV Technologies. All Rights Reserved.
crosschevron-down